Perform denoising on raw image data before it is demosaiced.
Moduł został przeportowany z dcraw .
kontrolki modułu
- próg szumu
- Próg wykrycia szumu. Wyższe wartości oznaczają silniejszą redukcję szumu i większą utratę szczegółów zdjęcia.
- coarse/fine curves
- The noise of an image is usually a combination of fine-grained and coarse-grained noise. These curves allow the image to be denoised more or less depending on the coarseness of the visible noise. The left of the curve will act on very coarse grain noise, while the right of the curve will act on very fine grain noise.
Raising the curve will result in more smoothing, while lowering it will result in less smoothing. As an example, you can preserve very fine-grained noise by pulling down the rightmost point of the curve to the minimum value.
If you are tackling chroma noise with a blend mode, you can raise the rightmost part of the curve quite high, as colors do not change a lot on fine grain scales. This will help especially if you see some isolated pixel left un-denoised.
Najlepszym sposobem użycia krzywych R, G i B będzie sprawdzenie każdego kanału po kolei przy użyciu modułu kalibracji koloru w trybie szarości, odszumienie tego kanału i powtórzenie tych czynności dla pozostałych kanałów. W ten sposób bierzesz pod uwagę fakt, że niektóre kanały mogą być bardziej zaszumione od innych. Zwróć uwagę, że zgadywanie najbardziej zaszumionego kanału bez wyizolowania go nie jest proste i może okazać się zwodnicze: całkowita czerwień piksela nie musi wynikać z szumu w kanale R, lecz być skutkiem szumu w kanałach G bądź B.
See the wavelet section for more details.