Batch Editing

Color calibration

— — Batch Editing

Eine umfassende Farbraumkorrektur, Weißabgleichanpassung und Kanalmixer-Modul.

Dieses einfache, doch mächtige Modul kann auf folgende Arten genutzt werden:

  • To adjust the white balance (chromatic adaptation), working in tandem with the white balance module. Here, the white balance module makes some initial adjustments (required for the demosaic module to work effectively), and the color calibration module then calculates a more perceptually-accurate white balance after the input color profile has been applied.

Exposure

— — Batch Editing

Erhöhe oder verringere die allgemeine Helligkeit des Bildes.

Dieses Modul hat zwei Arten der Bedienung:

manual
Set the exposure and black level manually
Automatisch (nur RAW)
Nutzt eine Analyse des Histogramms, um die Belichtung automatisch zu korrigieren. Ansel wählt automatisch die nötige Belichtungskompensation, um das gewählte Perzentil auf den Zielwert zu verschieben (siehe die Definitionen unten). Dieser Modus eignet sich insbesondere, um eine grosse Anzahl Bilder auf die gleiche Belichtung anzupassen. Eine typische Anwendung ist das Deflickering (Entflimmern) von Zeitrafferbildern.

Module controls

Mode
Choose the mode of operation (automatic/manual).
Compensate camera exposure (manual mode)
Automatically remove the camera exposure bias (taken from the image’s Exif data).
Exposure (manual mode)
Increase (move to the right) or decrease (move to the left) the exposure value (EV). To adjust by more than the default limits shown on the slider, right click and enter the desired value up to +/-18 EV.
The color picker on the right sets the exposure such that the average of the sampled region matches the target lightness defined in the spot exposure mapping options. The first time it is turned on, it samples nearly the whole image. Then click in the image to sample a point, or drag to sample a rectangular area.
While the module has the focus, holding Ctrl (⌘ on macOS) and clicking or dragging in the image samples in the same way without turning the picker on. See picking colors on the image.
Percentile (automatic mode)
Define a location in the histogram to use for automatic exposure correction. A percentile of 50% denotes a position in the histogram where 50% of pixel values are above and 50% of pixel values are below that exposure.
Target level (automatic mode)
Define the target level for automatic exposure correction (EV) relative to the white point of the camera.
Black level correction (manual and automatic modes)
Adjust the black level point to unclip negative RGB values.

Note: Do not use the black level correction to add more density in blacks as this can clip near-black colors out of gamut by generating negative RGB values. This can cause problems with some modules later in the pixelpipe. Instead, use a tone mapping curve to add density to the blacks. For example, you can use the relative black exposure slider on the scene tab of the filmic rgb module.

Search

You can also ask Chantal, the AI search engine.