Ansel entdeckt OpenCL-Laufzeitfehler automatisch. Nach einem Fehler wird alles erneut über die CPU berechnet. Das verringert zwar die Verarbeitungsgeschwindigkeit, sollte aber nicht das Endergebnis ändern.

Es gibt unterschiedliche Gründe, warum OpenCL während der Initialisierung fehlschlägt. OpenCL hängt von den Hardware-Anforderungen ab und von gewissen Treibern und Bibliotheken. Zusätzlich müssen alle diese hinsichtlich Hersteller, Modell und Revisionsnummer zusammenpassen. Falls etwas nicht stimmt (z.B. der Grafiktreiber, als Kernel Modul geladen, passt nicht zur Version der libOpenCL.so), wird eine OpenCL-Unterstützung wohl nicht verfügbar sein.

In einem solchen Fall ist es das Beste, Ansel in einer Konsole mit Ansel -d opencl zu starten.

Dies liefert zusätzliche Debugging-Informationen zur Intialisierung und Verwendung von OpenCL. Zunächst zeigt eine Zeile, die mit [opencl_init] FINALLY ... beginnt, ob OpenCL-Unterstützung vorhanden ist oder nicht. Falls die Initialisierung misslingt, hilft die Suche nach Meldungen der Art could not be detected oder could not be created, und der Hinweis dort, was falsch lief.

Hier ein paar Fälle, die in der Vergangenheit beobachtet wurden:

  • Ansel states that no OpenCL aware graphics card is detected or that the available memory on your GPU is too low and the device is discarded. In that case you might need to buy a new card if you really want OpenCL support.

  • Ansel finds your libOpenCL.so but then tell you that it couldn’t get a platform. NVIDIA drivers will often give error code -1001 in this case. This happens because libOpenCL.so is only a wrapper library. For the real work further vendor-specific libraries need to be loaded. This has failed for some reason. There is a structure of files in /etc/OpenCL on your system that libOpenCL.so consults to find these libraries. See if you can find something fishy in there and try to fix it. Often the required libraries cannot be found by your system’s dynamic loader. Giving full path names might help.

  • Ansel states that a context could not be created. This often indicates a version mismatch between the loaded graphics driver and libOpenCL. Check if you have left-over kernel modules or graphics libraries from an older installation and take appropriate action. When in doubt, perform a clean reinstall of your graphics driver. Sometimes, immediately after a driver update, the loaded kernel driver does not match the newly installed libraries. In this case reboot your system before trying again.

  • Ansel crashes during startup. This can happen if your OpenCL setup is completely broken or if your driver/library contains a severe bug. If you can’t fix it, you can still use Ansel with option --disable-opencl, which will skip the entire OpenCL initialization step.

  • Ansel fails to compile its OpenCL source files at run-time. In this case you will see a number of error messages looking like typical compiler errors. This could indicate an incompatibility between your OpenCL implementation and Ansel’s interpretation of the standard. In that case please raise an issue on github  and we will try to assist. Please also report if you see significant differences between CPU and GPU processing of an image.

Es gibt auch einige OpenCL-Anwendungen auf CPU, sie kommen als Treiber von INTEL oder AMD. Wir haben beobachtet, dass diese keinen Gewinn an Schnelligkeit im Vergleich zu unseren CPU-kodierten Einheiten erbringen. Deshalb löscht Ansel diese als Standard. Dieses Verhalten kann geändert werdenn, indem die Konfiguration-Variable opencl_use_cpu_devices (in $HOME/.config/Anselrc) auf TRUE.